You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | PRIMELINE TOOLS N 6848 1 in. Flat Nylon Wheel Bi-Fold Door Roller (2 Pack) This is a top centered mounted tricycle style roller that is adjustable. The three 1 inch flat durable nylon rollers provide a smooth and long lasting, quiet operation. They are attached to a stamped steel and nylon carriage mounted on top of a steel... ... more
PRIMELINE TOOLS N 6848 1 in. Flat Nylon Wheel Bi-Fold Door Roller (2 Pack) This is a top centered mounted tricycle style roller that is adjustable. The three 1 inch flat durable nylon rollers provide a smooth and long lasting, quiet operation. They are attached to a stamped steel and nylon carriage mounted on top of a steel... | go to store |
 | PRIMELINE TOOLS N 6710 Bi-Fold Door Top Pivot Bracket (1 Set) This is used to replace some new style bi-fold pivot brackets found on bi-fold doors. It is made up of a two piece nylon body with a stamped steel locking plate that locks it into place in the track. Install the bracket 1/2 inch from the door jamb.... ... more
PRIMELINE TOOLS N 6710 Bi-Fold Door Top Pivot Bracket (1 Set) This is used to replace some new style bi-fold pivot brackets found on bi-fold doors. It is made up of a two piece nylon body with a stamped steel locking plate that locks it into place in the track. Install the bracket 1/2 inch from the door jamb.... | go to store |
| Best Seller  | This is an adjustable stamped steel sliding closet door floor guide, with nylon tips. The guides are made of white nylon and can be adjusted to accommodate doors from 3/4 in. to 1-3/8 in. wide. Used by a variety of closet door manufacturers. |... ... more | go to store |
 | This Bypass Door Guide features a steel constructed base with nylon guide tips. This style guide is used by Johnson Hardware. | Prime-Line Stamped Steel, Adjustable, Closet Door, Floor Guide (Single Pack) 0.88 H x 3.94 W x 0.63 D in yellow in Gold |... ... more | go to store |
 | This is a by-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 in. to 1-3/8 in. closet doors if... ... more | go to store |
 | PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... ... more
PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... | go to store |
 | PRIMELINE TOOLS 161793 Bypass Closet Track Kit, 72 in., 2-Door Hardware, This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 71-in. to minimize the need for... ... more
PRIMELINE TOOLS 161793 Bypass Closet Track Kit, 72 in., 2-Door Hardware, This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 71-in. to minimize the need for... | go to store |
 | PRIMELINE TOOLS N 6796 Stamped Steel, Adjustable, Closet Door, Floor Guide This is a bi-pass floor guide used primarily on closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 inch to 1-3/8 inch closet doors. •Used for a wide... ... more
PRIMELINE TOOLS N 6796 Stamped Steel, Adjustable, Closet Door, Floor Guide This is a bi-pass floor guide used primarily on closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 inch to 1-3/8 inch closet doors. •Used for a wide... | go to store |
 | PRIMELINE TOOLS N 6724 Closet Door Roller,3-3/4" L The Prime-Line N 6724 Sliding Door Wheels Assembly is a four roller pocket door roller assembly used on Kennaframe pocket doors and a variety of other pocket door manufacturers. The pocket door assembly is affixed to an adjustable spring-loaded steel... ... more
PRIMELINE TOOLS N 6724 Closet Door Roller,3-3/4" L The Prime-Line N 6724 Sliding Door Wheels Assembly is a four roller pocket door roller assembly used on Kennaframe pocket doors and a variety of other pocket door manufacturers. The pocket door assembly is affixed to an adjustable spring-loaded steel... | go to store |
 | PRIMELINE TOOLS N 6549 Closet Door Guide,3-3/4" L These panel wardrobe door guides are constructed of stamped steel and include nylon inserts. Included with this pair of guides are 1 left-hand and 1 right-hand door guide, both which mount at the bottom of older style Acme and Stanley wardrobe doors.... ... more
PRIMELINE TOOLS N 6549 Closet Door Guide,3-3/4" L These panel wardrobe door guides are constructed of stamped steel and include nylon inserts. Included with this pair of guides are 1 left-hand and 1 right-hand door guide, both which mount at the bottom of older style Acme and Stanley wardrobe doors.... | go to store |
 | PRIMELINE TOOLS N 6870 Mirror Door Roller,3-3/4" L This Prime-Line N 6870 Mirror Door Roller Assembly is constructed of a steel housing and a concaved (grooved) edge, plastic wheel. The housing has 2-1/2 inch mounting hole centers, its body measures 1-11/16 inch wide and its only 7/16 inch deep. This... ... more
PRIMELINE TOOLS N 6870 Mirror Door Roller,3-3/4" L This Prime-Line N 6870 Mirror Door Roller Assembly is constructed of a steel housing and a concaved (grooved) edge, plastic wheel. The housing has 2-1/2 inch mounting hole centers, its body measures 1-11/16 inch wide and its only 7/16 inch deep. This... | go to store |
 | PRIMELINE TOOLS 161792 Bypass Closet Track Kit, 60 in., 2-Door Hardware, This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 59-in. to minimize the need for... ... more
PRIMELINE TOOLS 161792 Bypass Closet Track Kit, 60 in., 2-Door Hardware, This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 59-in. to minimize the need for... | go to store |
 | PRIMELINE TOOLS 161791 Bypass Closet Track Kit, 48 in., 2-Door Hardware, This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 47 in. to minimize the need for... ... more
PRIMELINE TOOLS 161791 Bypass Closet Track Kit, 48 in., 2-Door Hardware, This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 47 in. to minimize the need for... | go to store |
 | PRIMELINE TOOLS N 6517 Bypass Closet Door Top-Hung Back Rollers and Brackets (2 This is a side mount, top hung adjustable roller bracket with a 3/4 inch ball bearing convex nylon roller and 1/2 inch offset that fits onto the back wardrobe door panel. It fits 3/4 inch to 1-3/8 inch thick doors. •Used by a variety of by-pass door... ... more
PRIMELINE TOOLS N 6517 Bypass Closet Door Top-Hung Back Rollers and Brackets (2 This is a side mount, top hung adjustable roller bracket with a 3/4 inch ball bearing convex nylon roller and 1/2 inch offset that fits onto the back wardrobe door panel. It fits 3/4 inch to 1-3/8 inch thick doors. •Used by a variety of by-pass door... | go to store |
 | PRIMELINE TOOLS N 6649 Closet Door Roller, Back, 3/8 in. Offset, 7/8 in. Nylon This roller assembly is constructed from nylon. It comes affixed to a 3/8 inch offset stamped steel bracket. It fits on doors that are 3/4 inch to 1-3/8 inch thick. •Used as closet door rollers for the front panel •For 3/4 inch to 1-3/8 inch thick... ... more
PRIMELINE TOOLS N 6649 Closet Door Roller, Back, 3/8 in. Offset, 7/8 in. Nylon This roller assembly is constructed from nylon. It comes affixed to a 3/8 inch offset stamped steel bracket. It fits on doors that are 3/4 inch to 1-3/8 inch thick. •Used as closet door rollers for the front panel •For 3/4 inch to 1-3/8 inch thick... | go to store |
 | PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... ... more
PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... | go to store |
 | PRIMELINE TOOLS N 6531 Twin Pocket Door Roller, Top Mount (2 Pack) This tandem roller assembly is constructed from nylon. It features an adjustable top mount design with round edge nylon wheels with a 1/2 inch nut. It fits Acme and other similar styled doors that are 3/4 inch to 1-3/4 inch thick. •Used as a pocket... ... more
PRIMELINE TOOLS N 6531 Twin Pocket Door Roller, Top Mount (2 Pack) This tandem roller assembly is constructed from nylon. It features an adjustable top mount design with round edge nylon wheels with a 1/2 inch nut. It fits Acme and other similar styled doors that are 3/4 inch to 1-3/4 inch thick. •Used as a pocket... | go to store |
 | PRIMELINE TOOLS N 6948 Bi-Fold Door Guide Cap, Nylon, Fits 1/4 in. Rod (4 Pack) Closet Door Guide Cap, Bi-Fold Door, Nylon, White, Unfinished Finish, Shaft Length 5/8 in, Length (In.) 3/4 in, Height (In.) 5 7/16 in, Width (In.) 3 13/16 in, Depth (In.) 5/8 in, Wheel Diameter Not Applicable, Roller Width/Dia. (In.) No Roller, Door... ... more
PRIMELINE TOOLS N 6948 Bi-Fold Door Guide Cap, Nylon, Fits 1/4 in. Rod (4 Pack) Closet Door Guide Cap, Bi-Fold Door, Nylon, White, Unfinished Finish, Shaft Length 5/8 in, Length (In.) 3/4 in, Height (In.) 5 7/16 in, Width (In.) 3 13/16 in, Depth (In.) 5/8 in, Wheel Diameter Not Applicable, Roller Width/Dia. (In.) No Roller, Door... | go to store |
 | PRIMELINE TOOLS N 6936 Bi-Fold Door Hinges, Brass Plated, for Bi-Fold Doors (1 This is a set of brass hinges used on bi-fold doors. They are the non-mortised style hinges. The unique design causes the doors to be self-aligning. Used on wood doors 3/4 inch thick. •Brass Plated Hinges •Stamped Steel Construction •Non-Mortise Style... ... more
PRIMELINE TOOLS N 6936 Bi-Fold Door Hinges, Brass Plated, for Bi-Fold Doors (1 This is a set of brass hinges used on bi-fold doors. They are the non-mortised style hinges. The unique design causes the doors to be self-aligning. Used on wood doors 3/4 inch thick. •Brass Plated Hinges •Stamped Steel Construction •Non-Mortise Style... | go to store |
 | PRIMELINE TOOLS N 6701 Bi-Fold Door Pivot and Guide, Nylon (2 Pack) This bi-fold door pivot is constructed from nylon. It features a spring-loaded top mount design with a 7/16 inch diameter cap. With the spring loaded design it makes the removal of the door effortless. The 7/16 inch nylon base is used by a variety of... ... more
PRIMELINE TOOLS N 6701 Bi-Fold Door Pivot and Guide, Nylon (2 Pack) This bi-fold door pivot is constructed from nylon. It features a spring-loaded top mount design with a 7/16 inch diameter cap. With the spring loaded design it makes the removal of the door effortless. The 7/16 inch nylon base is used by a variety of... | go to store |
 | PRIMELINE TOOLS N 7302 Bi-Fold Top Mount Pivot and Guide, 3/8 in. Pivot Cap, This is a top mount bi-fold door guide wheel/cap on a spring-loaded steel shaft in a 3/8 inch nylon housing. The guide cap/wheel is 3/8 inch in diameter with a 5/8 inch lip and is used to fit into a 5/8 inch bi-fold door track. •Bi-fold door top guide... ... more
PRIMELINE TOOLS N 7302 Bi-Fold Top Mount Pivot and Guide, 3/8 in. Pivot Cap, This is a top mount bi-fold door guide wheel/cap on a spring-loaded steel shaft in a 3/8 inch nylon housing. The guide cap/wheel is 3/8 inch in diameter with a 5/8 inch lip and is used to fit into a 5/8 inch bi-fold door track. •Bi-fold door top guide... | go to store |
 | PRIMELINE TOOLS N 7289 Solid Brass, Satin Nickel, Ball Bullet Catch and Strike Closet Door Ball Catch/Strike, Sliding Door, Nylon, Silver, Unfinished Finish, Shaft Length 1-13/64 in, Length (In.) 2 1/8 in, Height (In.) 5 13/32 in, Width (In.) 3 3/4 in, Depth (In.) 1 13/64 in, Wheel Diameter Not Applicable, Roller Width/Dia. (In.)... ... more
PRIMELINE TOOLS N 7289 Solid Brass, Satin Nickel, Ball Bullet Catch and Strike Closet Door Ball Catch/Strike, Sliding Door, Nylon, Silver, Unfinished Finish, Shaft Length 1-13/64 in, Length (In.) 2 1/8 in, Height (In.) 5 13/32 in, Width (In.) 3 3/4 in, Depth (In.) 1 13/64 in, Wheel Diameter Not Applicable, Roller Width/Dia. (In.)... | go to store |
 | PRIMELINE TOOLS N 6512 Wardrobe Door Front Roller Assembly, 1 in., Convex Nylon This is a single wheel; top hung, side mounted adjustable roller bracket with a 1 inch convex nylon roller that fits onto the front wardrobe door panel. The stamped steel adjustable bracket has a 1/4 inch offset and fits onto a 3/4 inch to 1-3/8 inch... ... more
PRIMELINE TOOLS N 6512 Wardrobe Door Front Roller Assembly, 1 in., Convex Nylon This is a single wheel; top hung, side mounted adjustable roller bracket with a 1 inch convex nylon roller that fits onto the front wardrobe door panel. The stamped steel adjustable bracket has a 1/4 inch offset and fits onto a 3/4 inch to 1-3/8 inch... | go to store |
 | PRIMELINE TOOLS GD 52106 Heavy Duty Standard Garage Hinge 3 in. width Door Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more
PRIMELINE TOOLS GD 52106 Heavy Duty Standard Garage Hinge 3 in. width Door Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... | go to store |
 | PRIMELINE TOOLS GD 52105 Heavy Duty Standard Garage Hinge 3 in. W Door Leaf, Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more
PRIMELINE TOOLS GD 52105 Heavy Duty Standard Garage Hinge 3 in. W Door Leaf, Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... | go to store |
 | PRIMELINE TOOLS N 7288 Ball Bullet Catch and Strike, Satin Nickel Finished This is a ball bullet catch and strike. Satin nickel finished solid brass. 1/2 inch by 1-1/2 inch long barrel for mortise installation. Used on interior swinging closet or pantry doors. •Satin nickel solid brass •1/2 inch diameter by 1-1/2 inch long... ... more
PRIMELINE TOOLS N 7288 Ball Bullet Catch and Strike, Satin Nickel Finished This is a ball bullet catch and strike. Satin nickel finished solid brass. 1/2 inch by 1-1/2 inch long barrel for mortise installation. Used on interior swinging closet or pantry doors. •Satin nickel solid brass •1/2 inch diameter by 1-1/2 inch long... | go to store |
 | This is an adjustable stamped steel sliding closet door floor guide, with nylon tips. The guides are made of white nylon and can be adjusted to accommodate doors from 3/4 in. to 1-1/4 in. wide. Used by a variety of closet door manufacturers. |... ... more | go to store |
 | PRIMELINE TOOLS GD 52107 Standard Hinge, #4 Position with Fasteners, 3 in. Wide Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more
PRIMELINE TOOLS GD 52107 Standard Hinge, #4 Position with Fasteners, 3 in. Wide Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... | go to store |
 | Features:Set includes 2 pull handlesConstructed from stamped steelFor flush mount applicationInstallation nails includedProduct Type: Shutter/Door AccessoryFunction: Style: IndustrialFinish: Antique brassHand Painted: NoPrimary Material: SteelPrimary... ... more | go to store |
 | This closet door guide is constructed from plastic. It comes affixed to a bottom mount steel bracket. This guide is designed for use on steel framed bypassing doors. | Prime-Line Left & Right, Closet Door Bottom Guide, Stamped Steel (1 Pair) 2.8 H x... ... more | go to store |
 | PRIMELINE TOOLS GD 52104 Standard Hinge, #1 Position, with Fasteners, 3 in. Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more
PRIMELINE TOOLS GD 52104 Standard Hinge, #1 Position, with Fasteners, 3 in. Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... | go to store |
 | This Closet Door Bottom Guide Set is constructed from nylon. It features a bottom mount adjustable design that can also act as a corner bracket for steel frame bypassing doors. This roller fits on Acme and similar styled doors. | Prime-Line 1-1/2 in.... ... more | go to store |
 | These mortise pulls are constructed of stamped steel and come in a bright brass-plated finish. The pulls feature a depth of 5/16 inch. Pulls like these are ideal for use on by-passing wardrobe doors and they are easy to install. Used on doors from 3/4... ... more | go to store |
 | These mortise pulls are constructed of stamped steel and come in a bright brass-plated finish. The pulls feature a depth of 5/16 inch. Pulls like these are ideal for use on by-passing wardrobe doors and they are easy to install. Used on doors from 3/4... ... more | go to store |
 | These mortise pulls are constructed of stamped steel and come in a bright brass-plated finish. The pulls feature a depth of 5/16 inch. Pulls like these are ideal for use on by-passing wardrobe doors and they are easy to install. Used on doors from 3/4... ... more | go to store |
 | Features:Set includes 2 adjustable guidesPlastic constructionFeatures an adjustable bottom mount design that is used by many manufacturersProduct Type: Shutter/Door AccessoryFunction: Style: IndustrialFinish: TanHand Painted: NoPrimary Material:... ... more | go to store |
 | Features:Bottom mounted door guides help to keep your bypassing doors on track1 Left hand and 1 right handFeature a snap-in design that makes for easy installationAdjustable bracketFits Cox brand steel framed sliding doorsProduct Type: Shutter/Door... ... more | go to store |
 | This by-pass closet door repair kit includes four tandem roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of tandem roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset.... ... more | go to store |
 | Features:【Door Guide】 Barn door wall guide - High purity carbon solid steel, black anti-rust powder coated and environment-friendly. Best choice for keeping barn doors slide securely and straight.【Two installation methods, freely adjustable width】 Work... ... more | go to store |
Ads related to PRIMELINE TOOLS N 6560 Stamped Steel, Adjustable, Closet Door, Floor Guide 2
